DIAMOND COATED MACHINE GROOVED URETHANE COATED

PLANETA

DescriptionHome	Cylinder	Grip Texture	Press	Mfr ID		G.T. Stock#
20/5133	Imp. or Trans. Finger Recondition your parts.	D/C	40" - 65"			20/5133
The gripping surface is reconditioned by removing the old textur. Then each gripping surface will be ground parallel to the center of the gripper shaft. A diamond coating with a 60/80 grit texture will be applied.
20/5130-P	Delivery Pad	D/C	40" - 45" - 50"			20/5130 - P
20/5132 NewSteel / Old Plastic	Delivery Pad W x H 19 x 22.4mm	D/C	55" - 65"	313-69-01894		20/5132
20/5134	Shadow Pad W x H 20.7x 22.3mm	D/C	55" - 65"			20/5134
20/5125	Delivery Pad W x H 16 x 22.46mm	M/G	RAJ6Z	0343-170		20/5125
20/5135	Shadow Bar Pad W x H 20.5x 26mm	D/C	40" - 50"			20/5135
20/5124	Infeed Drum Pad W x H 19.7x 17.7mm	M/G	64"			20/5124
20/5120 20/5121 20/5140 20/5141	Imp. or Transfer Pads W x H 21 x 20 mm 25 x 20 mm	M/G	40" - 50"	210D1819 210D1819-A	21mm wide 25mm Wide	20/5120 20/5121
				210D1819-G 210D1819-H	21mm wide 25mm Wide	20/5140 20/5141
20/5122 20/5123	Perfector Cyld. Pad W X H 21 x 35.mm 25 x 35.mm	M/G		210D1819-B 210D1819-C	21mm wide 25mm Wide	20/5122 -A 20/5123-A,H
				210D1819-GL 210D1819-HL	21mm wide 25mm Wide	20/5142-G 20/5143-HL
x Important Note: These pads have many different heights. Please call for verification of dimensions before ordering.
20/5126-U 20/5126-G 20/5126-D	Imp. & Transfer Cyld. Pads W x H x D 20 x 30 x 7.2mm	U/C M/G D/C	KBA RAPIDA 104	# 611-187		20/5126-U 20/5126-G 20/5126-D
20/5127-U 20/5127-G	17 x 30 x 7.2 mm	U/C M/G	KBA RAPIDA 104	0135240		20/5127-U 20/5127-G
20/5129-D	23 x 30 x 6.7 mm	D/C	KBA RAPIDA 104	0054720		20/5129-D
20/5137	Transfer Cyld. Pads 17 x 30 x 7. mm	Hearden Steel	KBA RAPIDA 105	P0523240		20/5137
20/5136-P 20/5136-D	Swing Arm gripper. tips		KBA RAPIDA 105	P0067400		20/5136-P 20/5136-D
2R/5128 Recondition your Parts.	Imp Cyld. Tip	D/C	RAPIDA 104	L6117543		2R/5128
2R/5138 Recondition your Parts.	Infeed Cyld. Tip	D/C	KBA 16A	P 071-8920		2R/5138
2R/5139 Recondition your Parts.	Infeed Cyld. Pads	D/C	KBA 16A	P 083-2853 P 083-2820		2R/5139
20/5151	Imp. Cyld. Pads W x H 24.7 x 62.7 mm	D/C	60"			20/5151
20/5152 20/5154	Imp. Pads after Perfector. Width 25 mm 21 mm 25 mm	M/G	64" 50"			20/5152 20/5153 20/5154
2R/5155 Plate Clamp		Recondition your Plate Clamps with a Diamond coating 15.5" long segments D/C the 1/8" edge.		50 - 64” KBA Plate Clamp		2R/5155
Plate Clamp		Recondition your Plate Clamps with a Diamond coating 40" long, D/C 60/80 Grit		KBA 104 CX press		2R/5156

GT Specialties